Mediamorphy Guides

How to get a video under Discord's upload limit

Published November 17, 2026

You drag a clip into Discord and get "Your files are too powerful". Guessing at quality sliders until it fits wastes time, because file size is not a mystery: it is bitrate multiplied by duration. Work out the bitrate once and the clip fits on the first try.

First, find out what your limit is

Discord has changed the free upload limit several times: 8 MB for years, 25 MB in 2023, back down to 10 MB in 2024, and it has reportedly been raised again since. Paid plans get more (Nitro Basic has long been 50 MB), and boosted servers raise the limit for everyone posting in them. So do not trust a number from an old blog post, including this one. The error dialog that appears when an upload is rejected states the limit that applies to you in that channel. Use that number.

The only formula you need

A video file is a stream of bits. Its size is how many bits flow per second, times how many seconds it lasts. Turn that around and you get the bitrate that fits a given size:

Video bitrate (kbps) ≈ limit in MB × 7200 ÷ length in seconds − 128

The 7200 is 8000 kilobits per megabyte with a 10% safety margin, because encoders overshoot a little and the container adds overhead. The 128 is room for the audio track. A 45-second clip under a 10 MB limit works out to 10 × 7200 ÷ 45 − 128 = 1472, so about 1400k.

Ready-made numbers

Video bitrate to enter, with a resolution that still looks clean at that bitrate.
Clip length10 MB limit20 MB limit50 MB limit
30 seconds2200k · 720p4600k · 1080pkeep original
1 minute1000k · 720p2200k · 720p5800k · 1080p
2 minutes450k · 480p1000k · 720p2800k · 1080p
5 minutestrim first350k · 360p1000k · 720p

The resolution column matters as much as the bitrate. A fixed bitrate spread over 1080p's two million pixels looks blocky; the same bitrate at 720p or 480p looks sharp. When the number is under about 1000k, drop to 480p. Under 400k, use 360p or shorten the clip.

Doing it in the converter

  1. Open the video compressor and add your clip. It is processed in your browser and never uploaded.
  2. Open Trim / cut and keep only the part people need to see. Halving the length doubles the bitrate you can afford, which is the cheapest quality gain there is.
  3. Set Resolution from the table.
  4. Open Advanced: target bitrate, tick Use a fixed bitrate instead of the quality slider, and type the number, for example 1000k.
  5. Convert, then check the size shown on the result. If it lands slightly over, lower the bitrate by 10% and run it again.

Normally the quality slider is the better control, because it lets the encoder spend bits where the picture needs them. A hard size limit is the one case where a fixed bitrate wins: you care about the final size more than about consistent quality.

When the numbers say it cannot fit

Five minutes of gameplay in 10 MB leaves about 110 kbps for the picture. Nothing makes that watchable. You have three honest options: cut the clip down to the moment that matters, upload the full video somewhere built for it and paste the link, or split it into two posts. If the clip has no meaningful sound, ticking Remove audio track (mute) hands the audio's 128 kbps back to the picture, which is a real improvement at these sizes.

A note on GIFs

Converting to GIF to dodge the limit backfires. A GIF of the same clip is usually several times larger than the MP4, as our GIF vs MP4 guide explains. Discord plays MP4 inline, so send the MP4.

Try it yourself

More guides